Case 695ST - Transport Operations; Road Transport; Requirements for Road Travel

5-TRANSPORTOPERATIONS
5-TRANSPORTOPERATIONS###_5_###
ROADTRANSPORT
Requirementsforroadtravel
NOTE:Somecomponentsmaynotmatchyourmachine.
(Specictocertaincountries)Installallthemechanicallockingsystemsincompliancewithlegalrequirements.
Makesureyourmachineisinconformancewithlocallegislation.
Seegure1.
•
(1)Licenseplaces:Beforeundertakinganyroadtravel,
makesurethatthelicenceplatesareclean.
•
(2)Loaderbucketteethguard:Attachmentbyspring
andhookontheloaderbucket.
•
(3)Loaderattachmentboomtie-downstrap:When
travellingortransportingthemachineontheroad,it
guaranteesthattheloaderattachmentboomisse-
curedtotheframe.
•
(4)Loaderbucketretaining:Consistingofaforkedrod
linkingtheloaderbuckettothebucketlink.
•
(5)Loaderattachmentliftingcylinderlocking:Raisethe
attachmentsufcientlytobeabletoinstallthelockon
theboomcylinderrodandfastenitbymeansofthe
appropriateip.Slowlylowertheattachmenttoenable
thecylindertocomeintocontactwiththelockandstop
it.
•
(6)Rotatingbeacon:Therotatingbeaconmustbe
placedonthecabroof,withthecableconnectedto
oneofthesocketsmountedabovethecabdoors.
•
(7)T elescopicdipperlockingpin(iftted):Pacethepin
andtheretainingpininthelockedposition.
•
(8)Backhoebucketretaining:consistingofaretaining
beltlockingthebackhoebuckettothehooklocatedin
therearsideoftheframe.
•
(9)Backhoeattachmentlock:installthepininthelock-
ingbar.
•
(10)Stabilizerstrap:(sideshiftversion):fastensthe
stabilizerpadstotheframecolumns.
•
(11)Warningpanel:itisfastenedtothebucketby
meansofclips.
5-1