WHEELS/TIRES/BALLAST
135
RIGHT PAGE
Bur 6-34090EUR
Adding Air to the Tires
This procedure is only for adding air to
the tire. If the tire has lost most or all of
the air, do the following.
1. Before you add air, have the wheel
correctly installed on the machine
or put the wheel in a restraining
device (tire inflation cage).
B790490R
2. Use an air hose with remote shutoff
valve and a self-locking air chuck.
3. Stand BEHIND the tread of the tire
and make sure ALL persons are
away from the side of the tire
before you start to add air.
B4039288T
4. Inflate the tire to the recommended
air pressure. DO NOT inflate the
tire more than the recommended
pressure given on the following
page.
Tire or Rim Service
Always have a qualified tire mechanic
service the tires and rims for this
machine. It is recommended that you
have this mechanic inflate the tires. To
prevent accidents, use a restraining
device (tire inflation cage), correct
equipment, and correct procedure.
Explosive separation of the tire (single
piece rim) or the tire and/or rim parts
(multi-piece rim) can cause serious
injury or death.
Tire Tread Direction
When the tire is installed on the wheel
make sure the tire tread is in the
direction shown.
B770164R
FORWARD
To Next Page
Loading...
