EasyManua.ls Logo

Case 921C - Page 159

Case 921C
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LUBRICATION/FILTERS/FLUIDS
153
RIGHT PAGE
Bur 6-34090EUR
Engine Service Specifications
Oil Level check interval ................................ Every 10 hours of operation or each
day, whichever occurs first.
Oil Change interval (See Note) ................................ Every 500 hours of operation
Oil filter change interval (See Note) ......................... Every 500 hours of operation
or once a year whichever occurs first.
Oil type ....................................................... Case No. 1 Engine Oil (SAE 15W-40)
Oil Capacity - with filter change ...................................................... 36.9 litres39 (U.S. Quarts)
NOTE: Reduce oil change and oil filter change intervals to 250 hours or less if
Case No. 1 Engine Oil is
NOT used.
Engine Oil Level
To check the engine oil level put the
machine on a level surface and stop
the engine. Remove engine oil dipstick
and wipe clean with a cloth. Replace
dipstick in tube and push the engine oil
dipstick completely DOWN and then
remove. If the oil level is below the
ADD mark, add oil to raise the oil level
to the FULL mark. It takes 4 quarts
(3.78 litres) to raise the oil level from
the ADD mark to the FULL mark.
BD02B030
Copyright ©

Table of Contents

Related product manuals