CHK Power Quality MIRO PQ25 User Manual

CHK Power Quality Pty Ltd, User Manual – Miro Power Quality Logger and Analyser, 15 August 2016
Website: www.chkpowerquality.com.au; Enquiries: sales@chkpowerquality.com.au; Page 193
Address: Unit 1, 3 Tollis Place, Seven Hills, NSW 2147, Sydney, Australia; ABN: 53 169 840 831; Telephone: +61 2 8283 6945;
Fax: +61 2 8212 8105; Website: www.chkpowerquality.com.au
9.2.1.3 Flexible coil 3000 (Green)
Flexible coil 3000 (Green)
Part number: 1AFF3000-6 (3000A).
Instrument: PQ25 and PQ35.
Output signal: 78mV/kA @ 50Hz.
Frequency range: 10Hz to 20kHz.
Accuracy: ±0.5% (Calibrated).
Linearity: ±0.2% (Calibrated).
Coil length: 610mm.
Weight: 300g.
Cable length: 2m.
Environment: Indoor / outdoor.
Protection level: CAT IV 600V.
Colour: Green.
Figure 9.2.1.3.1
9.2.1.4 Clamp on CT probes 52mm - 100A
Clamp on CT probe 52mm - 100A
Instrument: PQ25 and PQ35.
Part number: 1ACR100.
Accuracy: ±0.5%.
Cable diameter: 52mm.
Rated current: 100Arms.
Frequency range: 5Hz-5kHz.
Weight: 750g.
Cable length: 1.95m.
Protection level: CAT IV 600V.
Figure 9.2.1.4.1

CHK Power Quality MIRO PQ25 Specifications

General

Device Type	Power Quality Analyzer
Frequency Range	45 Hz to 65 Hz
Harmonics	Up to 50th order
Communication Interfaces	USB, Ethernet
Safety Standard	IEC 61010-1
Accuracy	±0.5% of reading
Dimensions	240 x 180 x 80 mm
Weight	1.5 kg
Display	Color LCD
Data Logging	Yes, with internal memory
Power Supply	50/60 Hz
Current Range	Depends on CT used
Power Range	Calculated based on voltage and current input