Page | 57
Annex G – Maintenance & Care
OPTICS
• Keep the optical area clean when changing lenses by keeping the body and lens
mount caps on when the lens is separated from the camera.
• If the lens or sensor/IR filter is dusty, remove the dust using clean, dry
compressed air, dusting gas, or a dusting squeeze bulb. If dust persists, use a
brush or lens pen.
• If there is dust under the IR filter, you can remove the filter for cleaning. See
Removing the IR Filter in Annex C.
CAMERA BODY
• Do not expose the camera to moisture or excessively dusty environments.
• Do not expose the camera to molten metal.
• The camera body can be cleaned with a lint-free cloth, and optionally a small
amount of rubbing alcohol. Do not use excessive liquids as they may enter the
camera body.
SCREEN
• The touchscreen surface is breakable glass. Do not strike it with hard objects or
put excessive pressure on it.
• The screen should be cleaned with a lint-free or microfiber cloth.
• A small amount of glass cleaner or rubbing alcohol may be applied to the cloth if
required. Do not use excessive amounts, and don't spray glass cleaner directly
on the camera.
To Next Page
Loading...
