Page | 62
Annex I – Storage & Shipping
• Store the camera in a cool, dry, clean location.
• When shipping the camera, it's recommended to put it in a plastic bag with
desiccant to avoid problems with condensation during temperature changes.
• If the camera will be stored for more than a few weeks, charge or discharge
the battery to a 40% charge (approximately), then turn off the camera and
remove the battery. This will minimize battery capacity degradation during
storage.
• Before shipping, always enable Shipping Mode, found on the Util menu,
under the Factory Tab, to avoid the possibility of the camera turning on in-
transit. This mode requires the AC adapter to be connected the next time the
camera is turned on.
To Next Page
