Chronos 1.4 - Page 87

Page | 87
PLAY [CONTINUED]
Control
Function
Playback
Slider
The scroll bar controls the playback position over the entire recording. The
bottom is the beginning of the buffer, while the top is the end.
Jog Wheel
(Physical Dial)
Rotate to control current frame position. Turning the wheel clockwise will
advance playback by one frame per detent. Pushing the wheel in while turning
will advance playback by 40 frames per detent.
Forward/Back
Arrows
Advances the frame position forwards of backwards.
Play Rate
Forward/Back
Arrows
Increases or decreases playback rate when play button or forward/back arrows
are pressed. Range: 10 to 1920 fps.
This setting only affects the preview. To set the playback rate for saving, use the
Settings button in the Play screen.
Frame/Mark
Indicators
Show the current frame, number of frames recorded, and the current Mark Set
and Mark End frame positions.
Mark Start/End
Buttons
Set the Save Start or Save End position to the currently displayed frame. Only
the marked region will be saved.
Settings
Button
Opens the Save Settings pop-up. This is where the frame rate, save format and
text overlay are set.
Play Button
If One-touch Playback is enabled in the Util menu, the Play button automatically
advances frames without the need to hold down the forward arrow.
Save Button
Starts saving the marked region of video.
Close Button
Returns to live video mode. This does not erase the recording; it will remain in
memory until a new recording is started, a Black Calibration is performed, the
resolution is changed, or the video is otherwise cleared.