EasyManua.ls Logo

Chronos 1.4 - Page 93

Chronos 1.4
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page | 93
UTILITIES SCREEN MAIN [CONTINUED]
Control
Function
Enable Zebras
Enables the over-exposure indicator, which shows a rolling pattern of black lines
(referred to as “Zebra stripes”) over over-exposed areas of the image.
Live Record
@60fps
Records the footage as seen on the viewfinder to an external storage device as
specified by Live Record Location in parallel with the current high-speed
recording. In this mode, an external storage device must be connected prior to
recording, or else a warning message will be displayed, and only high-speed
footage will be recorded.
Audio is also recorded in this mode. The Chronos will automatically switch
between the built-in microphone and the line input jack if a line input is detected.
The resulting file is an MPEG-4 video with bitrates up to 6 Mbps and audio
sampled at 48 kHz. The maximum file size per clip is 4 GB. Please note that
some audio drift may occur with recordings that exceed 15 seconds.
Live Record
Location
Selects the storage device for saved video at 60 FPS. The list automatically
refreshes and switches to the most recently attached device. Please note that it
may take several seconds for a newly connected storage device to appear in the
list.
Videos saved using the Live Record mode will be named live_YYYY-MM-
DD_HH-MM-SS.mp4.
Close Button
Returns to the Main window. Settings are applied automatically as they are
changed.

Table of Contents

Related product manuals