125
Chapter 8 Usin
Camera
Timer
By default, timer is disabled. You have to manually press [Scan] or [Enter] to take one
picture at a time.
“3 seconds” and “10 seconds” are supported to activate the timer and take one picture.
This is only applicable in Still mode.
Resolution
By default, “1600 x 1200” pixels resolution is in use. Tap to select a proper resolution that
suits your application.
“320 x 240”, “640 x 480”, “1280 x 960”, and “2048 x 1536” pixels resolutions are also
supported.
This is only applicable in Still mode; Video mode supports “320 x 240” only.
Review Screen
By default, the review screen will appear for 5 seconds after each capture. You may extend
the review time to 10 seconds or disable the time limit.
This is only applicable in Still mode.
Storage
By default, the captured pictures are stored on the mobile computer’s main memory.
Camera Mode Store Folder File Format
Still Mode \My Device\My Documents
\My Pictures\YYMMDD
imgXXXXX.jpg (“XXXXX” stands for 5-digit
serial number starting from “00000”)
Video Mode \My Device\My Documents
\My Videos\YYMMDD
VideoXXX.3gp (“XXX” stands for 3-digit
serial number starting from “000”)
For example:
Five pictures taken on July 3rd, 2011 will be saved as “img00000.jpg” ~ “img00004.jpg”
under the folder of “\My Device\My Documents\My Pictures\110703”.
Two pictures taken on October 14th, 2011 will be saved as “Video000.3gp” ~ “Video001.3gp”
under the folder of “\My Device\My Documents\My Videos\111014”.
If you move the store folder to SD Card, the icon on upper left of the preview screen
will change to .
Audio
By default, the audio is included when recording a video. You may select not to record the
audio.
This is only applicable in Video mode.
To Next Page
Loading...
