CipherLab CP30 - Page 176

167
Appendix III 2D Imager
Transmit Check Digit Decide whether to include the UPC-A/UPC-E/UPC-E1 check
digit in the data being transmitted.
Yes
Convert to UPC-A The UPC-E0/UPC-E1 barcode will be expanded into UPC-A,
and the next processing will follow the settings configured
for UPC-A.
No
UCC coupon extended
code
Read UPC-A barcodes starting with digit "5", EAN-13
barcodes starting with digits "99", and UPC-A/GS1-128
Coupon Codes.
 UPC-A, EAN-13, and GS1-128 must be enabled first!
 Use “Addon Redundancy” to control
auto-discrimination of the GS1-128 (right half) of a
coupon code.
No
Transmit Preamble Decide whether to include the UPC-A/UPC-E/UPC-E1
preamble System Character (and Country Code) in the
data being transmitted.
System
Character
Code 11 Enable
Check digit verification Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
 Disable
 One Check Digit
 Two Check Digits
Disable
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
 "Check digit verification" must be enabled.
No
Select Length
(min/max)
 One or two fixed lengths
 Range (1~55)
4~55
Postal Codes ---
US Postnet Enable
US Planet Enable
Transmit US Postal
Check Digit
US Postnet or US Planet must be enabled first! Enable
UK Postal Enable
Transmit UK Postal
Check Digit
UK Postal must be enabled first! Enable
Japan Postal Enable
Australian Postal Enable
Dutch Postal Enable