1-25
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-8 Checklist for Installing the Cisco Unified IP Phones 7962G, 7942G, 7961G, 7961G-GE, 7941G, and 7941G-GE
Task Purpose For More Information
1. Choose the power source for the phone:
• Power over Ethernet (PoE)
• External power supply
Determines how the phone receives power.
See the “Providing Power to the Cisco Unified IP Phone”
section on page 2-3.
2. Assemble the phone, adjust phone placement, and
connect the network cable.
Locates and installs the phone in the network.
See the “Installing the Cisco Unified IP Phone” section
on page 3-5.
See the “Adjusting the Placement of the Cisco Unified IP
Phone” section on page 3-9.
3. Add a Cisco Unified IP Phone Expansion Module.
Adds the device with its default settings to the Cisco
Unified Communications Manager database.
Extends functionality of a Cisco Unified IP Phone
7962G by adding 14 (7914) or 24 (7915 and 7916) line
appearances or speed-dial numbers.
Extends functionality of a Cisco Unified IP Phone
7961G and 7961G-GE by adding 14 (7914) line
appearances or speed-dial numbers.
Note Cisco Unified IP Phone Expansion Module
7914 is not supported on the Cisco Unified IP
Phone 7942G, 7941G, and 7941G-GE.
Note Cisco Unified IP Phone Expansion Modules
7915 and 7916 are not supported on the Cisco
Unified IP Phone 7942G, 7961G, 7961G-GE,
7941G, and 7941G-GE.
See the “Attaching a Cisco Unified IP Phone Expansion
Module” section on page 3-8.
4. Monitor the phone startup process.
Adds primary and secondary directory numbers and
features associated with directory numbers to the
phone.
Verifies that phone is configured properly.
See the “Verifying the Phone Startup Process” section on
page 3-12.
To Next Page
Loading...
