Controlling the Receipt of SA Messages from MSDP Peers Using Incoming Filter Lists 223
Using TTL Thresholds to Limit the Multicast Data Sent in SA Messages 224
Requesting Source Information from MSDP Peers 225
Controlling the Response to Outgoing SA Request Messages from MSDP Peers Using SA
Request Filters 226
Including a Bordering PIM Dense Mode Region in MSDP 227
Configuring an Originating Address Other Than the RP Address 228
Monitoring MSDP 229
Clearing MSDP Connections Statistics and SA Cache Entries 232
Enabling SNMP Monitoring of MSDP 233
Troubleshooting Tips 234
Configuration Examples for Using MSDP to Interconnect Multiple PIM-SM Domains 235
Example: Configuring an MSDP Peer 235
Example: Configuring MSDP MD5 Password Authentication 235
Example: Configuring a Default MSDP Peer 236
Example: Configuring MSDP Mesh Groups 238
Additional References 238
Feature History and Information for Multicast Source Discovery Protocol 239
CHAPTER 10
Configuring Wireless Multicast 241
Finding Feature Information 241
Prerequisites for Configuring Wireless Multicast 241
Restrictions for Configuring Wireless Multicast 242
Restrictions for IPv6 Snooping 242
Restrictions for IPv6 RA Guard 242
Information About Wireless Multicast 242
Information About Multicast Optimization 243
IPv6 Global Policies 244
IPv6 RA Guard 244
Information About IPv6 Snooping 244
IPv6 Neighbor Discovery Inspection 244
IPv6 ND Inspection 245
IPv6 Device Tracking 245
IPv6 First-Hop Security Binding Table 245
Recovery Protocols and Prefix Lists 245
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
xii OL-32598-01
Contents
To Next Page
Loading...
