EasyManuals Logo

Cisco Catalyst 3850 series User Manual

Cisco Catalyst 3850 series
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #204 background imageLoading...
Page #204 background image
PurposeCommand
Displays information about interfaces configured for
Protocol Independent Multicast (PIM).
show ip pim interface
Displays the PIM neighbor information.show ip pim neighbor
Displays RP routers associated with a sparse-mode
multicast group. This command is available in all
software images.
show ip pim rp[group-name | group-address]
Displays information about Protocol Independent
Multicast (PIM) tunnel interfaces
show ip pim tunnel [tunnel | verbose]
Displays the VPN routing/forwarding instance.show ip pim vrf { word { all-vrfs | autorp |
boundary | bsr-router | interface | mdt | neighbor
| rp | rp-hash | tunnel } }
Displays the interested clients that have joined the
specific multicast source group.
show ip igmp groups detail
Monitoring the RP Mapping and BSR Information
Use the privileged EXEC mode in the following table to verify the consistency of group-to-RP mappings:
Table 16: RP Mapping Monitoring Commands
PurposeCommand
Displays all available RP mappings and metrics. This tells
you how the device learns of the RP (through the BSR or the
Auto-RP mechanism).
•
(Optional) For the hostname, specify the IP name of the
group about which to display RPs.
•
(Optional) For the IP address, specify the IP address of
the group about which to display RPs.
•
(Optional) Use the mapping keyword to display all
group-to-RP mappings of which the Cisco device is
aware (either configured or learned from Auto-RP).
•
(Optional) Use the metric keyword to display the RP
RPF metric.
show ip pim rp [ hostname or IP address |
mapping [ hostname or IP address | elected
| in-use ] | metric [ hostname or IP address
] ]
Displays the RP that was selected for the specified group. That
is, on a PIMv2 router or multilayer device, confirms that the
same RP is the one that a PIMv1 system chooses. For group,
enter the group address for which to display RP information.
show ip pim rp-hash group
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
180 OL-32598-01
Configuring PIM
Monitoring the RP Mapping and BSR Information

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 3850 series and is the answer not in the manual?

Cisco Catalyst 3850 series Specifications

General IconGeneral
ModelCisco Catalyst 3850 Series
RAM4 GB
Flash Memory4 GB
Stacking Bandwidth480 Gbps
Device TypeSwitch
Enclosure TypeRack-mountable
Routing ProtocolOSPF, EIGRP, BGP, RIP
Remote Management ProtocolSNMP, CLI, HTTP, HTTPS
FeaturesQuality of Service (QoS)
StackingYes
Memory4 GB RAM
Operating SystemCisco IOS
Relative Humidity10 - 95% (non-condensing)
Power Supply OptionsAC or DC
Ports24 or 48 10/100/1000 Ethernet ports

Related product manuals