Name: Cisco Catalyst 3850 series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Related Topics

MSDP Peers, on page 203

Example: Configuring an MSDP Peer, on page 235

Shutting Down an MSDP Peer

Perform this optional task to shut down an MSDP peer.

If you are configuring several MSDP peers and you do not want any of the peers to go active until you have

finished configuring all of them, you can shut down each peer, configure each peer, and later bring each peer

up. You might also want to shut down an MSDP session without losing the configuration for that MSDP peer.

When an MSDP peer is shut down, the TCP connection is terminated and not restarted until the peer is

brought back up using the no ip msdp shutdown command (for the specified peer).

Note

Before You Begin

MSDP is running and the MSDP peers must be configured.

SUMMARY STEPS

enable

configure terminal

ip msdp shutdown {peer-name | peer-address}

Repeat Step 3 to shut down additional MSDP peers.

end

DETAILED STEPS

PurposeCommand or Action

Enables privileged EXEC mode.enable

Step 1

Example:

Device> enable

•

Enter your password if prompted.

Enters global configuration mode.configure terminal

Example:

Device# configure terminal

Step 2

IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)

212 OL-32598-01

Configuring MSDP

Shutting Down an MSDP Peer

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst 3850 series and is the answer not in the manual?

Cisco Catalyst 3850 series Specifications

General