Name: Cisco Catalyst 3850 series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

PurposeCommand or Action

Exits global configuration mode and returns to

privileged EXEC mode.

exit

Example:

Device(config)# exit

Step 5

Controlling the Receipt of SA Messages from MSDP Peers Using Incoming

Filter Lists

Perform this optional task to control the receipt of incoming SA messages from MSDP peers.

For best practice information related to configuring MSDP SA message filters, see the Multicast Source

Discovery Protocol SA Filter Recommendations tech note.

Note

SUMMARY STEPS

enable

configure terminal

ip msdp sa-filter in {peer-address | peer-name} [list access-list] [route-map map-name] [rp-list access-list

| rp-route-map map-name]

Repeat Step 3 to configure incoming filter lists for additional MSDP peers.

exit

DETAILED STEPS

PurposeCommand or Action

Enables privileged EXEC mode.enable

Step 1

Example:

Device> enable

•

Enter your password if prompted.

Enters global configuration mode.configure terminal

Example:

Device# configure terminal

Step 2

IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)

OL-32598-01 223

Configuring MSDP

Controlling the Receipt of SA Messages from MSDP Peers Using Incoming Filter Lists

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst 3850 series and is the answer not in the manual?

Cisco Catalyst 3850 series Specifications

General