Related Topics
Service Discovery Gateway , on page 311
Filtering, on page 312
Example: Specify Alternative Source Interface for Outgoing mDNS Packets, on page 321
Example: Redistribute Service Announcements, on page 321
Example: Disable Bridging of mDNS Packets to Wireless Clients, on page 321
Example: Enabling mDNS Gateway and Redistributing Services, on page 322
Example: Global mDNS Configuration, on page 322
Example: Interface mDNS Configuration, on page 323
Configuring Interface Service Rules (GUI)
Step 1
Choose Configuration > Controller > mDNS > Interface.
Step 2
Click an interface name.
The Interface Service Rules page is displayed.
Step 3
From the Service Policy IN drop-down list, choose the service policy that should be applied for incoming mDNS
messages.
Step 4
From the Service Policy OUT drop-down list, choose the service policy that should be applied for outgoing mDNS
messages.
Step 5
Select or unselect the Redistribution check box to enable or disable redistribution of service announcements received
on one interface over all the interfaces or over a specific interface.
Step 6
Check Enable to enable a self designated gateway for the interface.
Step 7
Enter values for proximity- maximum service option and service list active query in the text box.
The value ranges from 1 to 100 for maximum service.
Step 8
To create a new Service Type, select Create New from the drop-down box.
Step 9
Click Apply.
Step 10
Click Save Configuration.
Configuring mDNS Global Rules (GUI)
Step 1
Choose Configuration > Controller > mDNS > Global.
Step 2
Select the mDNS gateway check box.
Step 3
Follow these steps to configure downstream rules that include service lists and service rules that you can apply for all
the downstream traffic on the device.
a) Click the Down Stream Rules tab.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
OL-32598-01 319
Configuring the Service Discovery Gateway
Configuring Interface Service Rules (GUI)
To Next Page
Loading...
Need help?
General
