PurposeCommand or Action
Example:
Device# show ip pim rp mapping
Displays the information cached in the routing table.show ip pim rp
Step 10
Example:
Device# show ip pim rp
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Device# copy running-config
Step 11
startup-config
Related Topics
Auto-RP, on page 130
Example: Configuring Auto-RP, on page 182
Example: Sparse Mode with Auto-RP , on page 183
Restrictions for Configuring Auto-RP and BSR, on page 123
Restrictions for Auto-RP Enhancement, on page 125
Adding Auto-RP to an Existing Sparse-Mode Cloud (CLI)
This section contains suggestions for the initial deployment of Auto-RP into an existing sparse-mode cloud
to minimize disruption of the existing multicast infrastructure.
This procedure is optional.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
OL-32598-01 149
Configuring PIM
Configuring a Rendezvous Point
To Next Page
Loading...
