Cisco Catalyst 3850 series

DescriptionCommands
Displays the client-to-SGV mappings and
SGV-to-client mappings.
show ip igmp snooping igmpv2-tracking
Displays IGMP querier information for the specified
VLAN.
show ip igmp snooping querier vlan vlanid
Displays detailed IGMP querier information of all
the VLANs.
show ip igmp snooping querier detail
Displays MLD querier information for the specified
VLAN.
show ipv6 mld snooping querier vlan vlanid
Displays MGIDs for IPv6 multicast group.show ipv6 mld snooping wireless mgid
Where to Go Next for Wireless Multicast
You can configure the following:
•
IGMP
•
PIM
•
SSM
•
IP Multicast Routing
•
Service Discovery Gateway
You can also review the following IP Multicast Optimization processes for your configuration:
•
Optimizing PIM Sparse Mode in a Large IP Multicast Deployment
•
Multicast Subsecond Convergence
•
IP Multicast Load Splitting across Equal-Cost Paths
•
SSM Channel Based Filtering for Multicast
•
PIM Dense Mode State Refresh
•
IGMP State Limit
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
256 OL-32598-01
Configuring Wireless Multicast
Where to Go Next for Wireless Multicast