Cisco Catalyst 3850 series User Manual

Device C Configuration
ip msdp default-peer 10.1.1.1 prefix-list site-b ge 32
ip prefix-list site-b permit 10.0.0.0/8
Related Topics
Configuring a Default MSDP Peer, on page 218
Default MSDP Peers, on page 205
Example: Configuring MSDP Mesh Groups
The following example shows how to configure three devices to be fully meshed members of an MSDP mesh
group:
Device A Configuration
ip msdp peer 10.2.2.2
ip msdp peer 10.3.3.3
ip msdp mesh-group test-mesh-group 10.2.2.2
ip msdp mesh-group test-mesh-group 10.3.3.3
Device B Configuration
ip msdp peer 10.1.1.1
ip msdp peer 10.3.3.3
ip msdp mesh-group test-mesh-group 10.1.1.1
ip msdp mesh-group test-mesh-group 10.3.3.3
Device C Configuration
ip msdp peer 10.1.1.1
ip msdp peer 10.2.2.2
ip msdp mesh-group test-mesh-group 10.1.1.1
ip msdp mesh-group test-mesh-group 10.2.2.2
Related Topics
Configuring an MSDP Mesh Group, on page 219
MSDP Mesh Groups, on page 206
Additional References
Related Documents
Document TitleRelated Topic
IPv6 Configuration Guide
IPv6 addressing and connectivity
Cisco IOS Master Commands List, All Releases
Cisco IOS commands
Cisco IOS IP Multicast Command Reference
IP multicast commands
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
238 OL-32598-01
Configuring MSDP
Example: Configuring MSDP Mesh Groups

Cisco Catalyst 3850 series Specifications

General

Model	Cisco Catalyst 3850 Series
RAM	4 GB
Flash Memory	4 GB
Stacking Bandwidth	480 Gbps
Device Type	Switch
Enclosure Type	Rack-mountable
Routing Protocol	OSPF, EIGRP, BGP, RIP
Remote Management Protocol	SNMP, CLI, HTTP, HTTPS
Features	Quality of Service (QoS)
Stacking	Yes
Memory	4 GB RAM
Operating System	Cisco IOS
Relative Humidity	10 - 95% (non-condensing)
Power Supply Options	AC or DC
Ports	24 or 48 10/100/1000 Ethernet ports