Name: Cisco Catalyst 3850 series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

PurposeCommand or Action

gigabitethernet1/0/1

(Optional) Saves your entries in the configuration file.copy running-config startup-config

Example:

Device# copy running-config startup-config

Step 7

Configuring the IGMP Throttling Action (CLI)

After you set the maximum number of IGMP groups that a Layer 2 interface can join, you can configure an

interface to replace the existing group with the new group for which the IGMP report was received.

Follow these steps to configure the throttling action when the maximum number of entries is in the forwarding

table:

SUMMARY STEPS

enable

configure terminal

interface interface-id

ip igmp max-groups action {deny | replace}

end

show running-config interface interface-id

copy running-config startup-config

DETAILED STEPS

PurposeCommand or Action

Enables privileged EXEC mode. Enter your password if prompted.enable

Step 1

Example:

Device> enable

Enters the global configuration mode.configure terminal

Example:

Device# configure terminal

Step 2

IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)

64 OL-32598-01

Configuring IGMP

Configuring the IGMP Throttling Action (CLI)

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst 3850 series and is the answer not in the manual?

Cisco Catalyst 3850 series Specifications

General