7-21
Cisco SCE8000 GBE Installation and Configuration Guide
OL-19897-02
Chapter 7 Basic Cisco SCE8000 GBE Platform Operations
How to Display the System Uptime
NAME: "SCE8000 traffic processor 11", DESCR: "SCE8000 traffic processor"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 traffic processor 12", DESCR: "SCE8000 traffic processor"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device port 0", DESCR: "SCE8000 External bypass device"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device port 1", DESCR: "SCE8000 External bypass device"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device 0/0", DESCR: "This module isn't connected"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device 0/1", DESCR: "This module isn't connected"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device 1/0", DESCR: "This module isn't connected"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device 1/1", DESCR: "This module isn't connected"
PID: "" , VID: "" , SN: ""
How to Display the System Uptime
Use this command to see how long the system has been running since the last reboot.
Step 1 At the SCE> prompt, type show system-uptime and press Enter.
Example for Displaying the System Uptime
The following example shows how to display the system uptime of the SCE platform.
SCE#show system-uptime
Cisco SCE8000 GBE uptime is 21 minutes, 37 seconds
Rebooting and Shutting Down the SCE Platform
• Rebooting the SCE Platform, page 7-22
• How to Shut Down the SCE Platform, page 7-22
To Next Page
Loading...
