Cisco SCE8000 GBE - How to Display the SCE Platform Inventory; Examples for Displaying the SCE Platform Inventory

7-14
Cisco SCE8000 GBE Installation and Configuration Guide
OL-19897-02
Chapter 7 Basic Cisco SCE8000 GBE Platform Operations
How to Display the SCE Platform Inventory
Using Lib - PL_3.5.5_b74
Using Lib - Classifier_3.5.5_b74
Application help: Entry point of Engage
Original source file:
/auto/srbu-proj1/apps/users/atukh/autoBuild/App/SML/Engage/dev/src/com/pcube/AppTemplate/M
ain/template_app_main.san
Compilation date: Tue, May 19, 2009 at 19:51:58
Compiler version: SANc v3.20 Build 12 built on: Tue 02/01/2009 11:11:05.;SME plugin v1.1
Capacity option used: 'EngageDefaultSCE8000'.
Logger status: Enabled
Platform: SCE8000
Management agent interface version: SCE Agent 3.5.5 Build 121
Software package file: Not available
SCE8000 uptime is 26 minutes, 53 seconds
How to Display the SCE Platform Inventory
Unique Device Identification (UDI) is a Cisco baseline feature that is supported by all Cisco platforms.
This feature allows network administrators to remotely manage the assets in their network by tracing
specific devices through either CLI or SNMP. The user can display inventory information for a remote
device via either:
• Entity MIB (see ENTITY-MIB in the “Cisco Service Control MIBs” appendix of the Cisco SCE8000
GBE Software Configuration Guide)
• CLI show inventory command
This command displays the UDIs only for field replaceable units (FRU).
• CLI show inventory raw command.
This command displays all UDIs on the Cisco SCE8000 GBE platform.
The show inventory CLI commands display the following information:
• Device name
• Description
• Product identifier
• Version identifier
• Serial number
Step 1 From the SCE> prompt, type show inventory [raw] and press Enter.
Examples for Displaying the SCE Platform Inventory
• Displaying the SCE Platform Inventory: FRUs Only, page 7-15
• Displaying the Complete SCE Platform Inventory, page 7-16