7-23
Cisco SCE8000 GBE Installation and Configuration Guide
OL-19897-02
Chapter 7 Basic Cisco SCE8000 GBE Platform Operations
Rebooting and Shutting Down the SCE Platform
Examples for Shutting Down the SCE Platform
The following example shows the commands for system shutdown.
SCE#reload shutdown
You are about to shut down the system.
The only way to resume system operation after this
is to cycle the power off, and then back on.
Continue?
y
IT IS NOW SAFE TO TURN THE POWER OFF.
Note Since the SCE platform can recover from the power-down state only by being physically turned off (or
cycling the power), this command can only be executed from the serial CLI console. This limitation
helps prevent situations in which a user issues this command from a Telnet session, and then realizes he
or she has no physical access to the SCE platform.
To Next Page
Loading...
