6-17
Cisco SCE8000 GBE Installation and Configuration Guide
OL-19897-02
Chapter 6 Cabling the GBE Line Ports and Completing the Installation
Cascaded Systems
Monitoring a Cascaded System
Use the following commands to monitor a cascaded system. They provide information regarding the
connection status and link configuration.
How to View the Current Connection Mode
Step 1 From the SCE> prompt, type show interface linecard 0 connection-mode and press Enter.
How to View the SCE-ID
Step 1 From the SCE> prompt, type show interface linecard 0 sce-id and press Enter.
How to View the Current Link Mode
Step 1 From the SCE> prompt, type show interface linecard 0 link mode and press Enter.
How to View the Current Link to Port Mappings
Step 1 From the SCE> prompt, type show interface linecard 0 link-to-port-mapping and press Enter.
How to View the Current Redundancy Status of the SCE Platform
Step 1 From the SCE> prompt, type show interface linecard 0 cascade redundancy-status and press Enter.
How to View Information about the Peer SCE Platform
Step 1 From the SCE> prompt, type show interface linecard 0 cascade peer-sce-information and press Enter.
How to View Information about the Cascade Connections
Step 1 From the SCE> prompt, type show interface linecard 0 cascade connection-status and press Enter.
To Next Page
Loading...
