CHAPTER
9-1
Cisco SCE8000 GBE Installation and Configuration Guide
OL-19897-02
9
Removal and Replacement Procedures
Revised: August 23, 2010, OL-19897-02
Introduction
This chapter describes how to perform removal and replacement procedures for Cisco SCE8000 GBE
platform field-replaceable units (FRUs).
Warning
Before you install, operate, or service the system, read the Regulatory Compliance and Safety
Information for the Cisco SCE8000 GBE . This guide contains important safety information you should
know before working with the system.
• Safety, page 9-2
• Preventing Electrostatic Discharge Damage, page 9-2
• Supported Hardware, page 9-3
• Removing and Replacing the Power Supply, page 9-4
• Removing and Replacing the Fan Assembly, page 9-12
• Removing and Replacing Modules, page 9-13
• Removing and Replacing Shared Port Adapters, page 9-23
• Removing and Replacing the Optical Bypass Module, page 9-27
To Next Page
Loading...
