Cisco SCE8000 GBE - Page 171

A-5
Cisco SCE8000 GBE Installation and Configuration Guide
OL-19897-02
Appendix A CLI Commands to Verify a Successful Installation
Basic Post-Installation Checklist
spa[2] : SPA-1X10GE-L-V2
spa[3] : SPA-1X10GE-L-V2
---------------------
SCE8000 Chassis
---------------------
product-num : SCE8000
serial-num : FOX1235GP98
part-num : 73-11293-01
part-rev : A0
vid : V01
Part number : 73-10598-01 36
Revision : 1
Software revision : 1
LineCard S/N : CAT1151G012
Power Supply type : AC
SML Application information is:
Application file: /apps/data/scos/app/en355262.sli
Application name: Engage SML Version 3.5.5 build 74
Using Lib - PL_3.5.5_b74
Using Lib - Classifier_3.5.5_b74
Application help: Entry point of Engage
Original source file:
/auto/srbu-proj1/apps/users/atukh/autoBuild/App/SML/Engage/dev/src/com/pcube/AppTemplate/M
ain/template_app_main.san
Compilation date: Tue, May 19, 2009 at 19:51:58
Compiler version: SANc v3.20 Build 12 built on: Tue 02/01/2009 11:11:05.;SME plugin v1.1
Capacity option used: 'EngageDefaultSCE8000'.
Logger status: Enabled
Platform: SCE8000
Management agent interface version: SCE Agent 3.5.5 Build 121
Software package file: ftp://ftpserver/D:\pcube\Os\3.5.5\252\simba_03550252_K9.pkg
SCE8000 uptime is 4 days, 21 hours, 40 minutes, 37 seconds
show inventory
Look for the following lines:
• All lines containing the text ‘NAME: "SCE8000 optic’. There should be one line for each installed
optic.
SCE>show inventory
NAME: "SCE8000 Chassis", DESCR: "SCE8000"
PID: SCE8000 , VID: V01, SN: FOX1235GP98
NAME: "SCE8000 Service Control Module (SCM) in slot 1", DESCR: """"
PID: "" , VID: "" , SN: CAT1151G012
NAME: "SCE8000 SPA Interface Processor (SIP) in slot 3", DESCR: """"
PID: "" , VID: "" , SN: CAT1150G075
NAME: "SCE8000 SPA module 3/0", DESCR: "SPA-8X1GE-V2"