User Guide| LQ Series 4.0
14 LQ to HelixNet connectivity
LQ 4.0 and above.
HelixNet 4.0 and above.
Linking one ore more LQ units to a HelixNet Main Station (HMS) in a Link-Group is a
way of greatly increasing the number of I/O interfaces available in your HelixNet
intercom system.
The HelixNet Main Station must be the Link Master in any Link-Group.
Linking HelixNet and LQ also brings Agent-IC, SIP and Eclipse (IVC) connectivity
into your HelixNet system.
14.1 HelixNet/LQ Link-Group
Once an LQ unit is linked to an HMS in a Link-Group, all ports on the LQ unit are
visible in the CCM and available to be placed in a HelixNet Channel. Once a port is in
a Channel, audio from that port can be routed anywhere within the system.
Page 123
To Next Page
Loading...
