Clear-Com LQ-2W2 User Manual

User Guide| LQ Series 4.0
For more information on how to put ports in Channels see Assignments on page
40.
Note: Multi-Channel ports will not be placed in a local audio mix, they will be transported
as a single audio stream. You can use the Resource Meter as a guideline for device
capacity.
For more information, see:
Resource Bar on page 24
3.7 Roles
When using LQ, some of the products you interconnect with use Roles for the
purpose of intercom setup. Roles are preset configurations, used to simplify and
control your intercom installation. You can work with default Roles which can be
cloned or edited. You can also create your own Roles if required.
The products that use Roles when connecting to LQ devices are: HelixNet and
Agent-IC.
When a HelixNet device is linked to LQ in a Link-Group set up, the Role
configuration from the Master HelixNet device will override the LQ units.
For more information about HelixNet Role configuration, see the HelixNet User
Guide, available from the Clear-Com website.
For more information about Agent-IC Role configuration see Agent-IC and LQ on
page 131
Page 39

Clear-Com LQ-2W2 Specifications

General

Brand	Clear-Com
Model	LQ-2W2
Category	Intercom System
Language	English