User Guide| LQ Series 4.0
Important Safety Instructions
l Intended Audience: Professional, Technical and Qualified Personnel
l Read these instructions.
l Keep these instructions.
l Heed all warnings.
l Follow all instructions.
l Do not use this apparatus near water.
l Clean only with dry cloth.
l Install in accordance with the manufacturer’s instructions.
l Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
l Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
l Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
l Only use attachments/accessories specified by the manufacturer.
l Unplug this apparatus during lightning storms or when unused for long periods
of time.
l Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way such as; power-cord supply or
plug is damaged, liquid has been spilled, objects have fallen into the
apparatus, the apparatus has been exposed to heavy rain, the apparatus does
not operate normally.
l Caution: Shielded Cable Requirement
l Shielded Cable is required for ALL LQ SERIES GPIO Port connectivity. Shielded
Cable must be used to assure compliance with domestic and international
emissions standards. Customers, Installers and or qualified Personnel failing
to use shielded cables may cause radio interference in which case the user
may be required to take adequate measures.
Page 7
To Next Page
Loading...
Need help?
General
