Clear-Com LQ-2W2 - 2-Wire Features; 4-Wire + GPIO Features

User Guide| LQ Series 4.0
l Browser- based Core Configuration Manager (CCM)
l Adjustable audio quality settings to make the best use of available network
resources
l Low latency OPUS codec
l LQ throw-down units: external power supply or Power over Ethernet (PoE)
l LQ 1-RU devices: dual redundant external power supply
l IVC-32 linking with Clear-Com Eclipse frames using G.722 codec (EHX 8.7 and
above).
1.3 2-wire features
l 2-wire throw-down units can be powered locally by PoE or external PSU
l 2-wire line termination
l Auto nulling
l Clear-Com/RTS modes with both RMK/Call signaling pass-through (Clear-Com
only).
1.4 4-wire features
l Port Function switching alleviates the need for crossover cables
l Panel data pass-through facilitates the connection of Clear-Com panels to
matrix over any IP network
l Call signaling.
1.5 4-wire + GPIO features
l Network Control Events for flexible and scalable activation and passing of
GPIO and controls
l Designed to work with low power 2-way radios (or any device that uses a
relay trigger)
l Passes GPIO/control/data between LQ and Eclipse Matrix frame.
Page 9