User Guide| LQ Series 4.0
13.8 How to use SIP calls
When a SIP call comes into a Channel (SIP-enabled ports must be placed in a
Channel before they can be used) the LQ device answers the call automatically.
How the call is monitored and responded to depends on which device you are
working from how the client device is configured.
13.8.1
How to establish and end calls using the LQ unit CCM
SIP calls can be managed from the Assignments page of the CCM. You can:
l Dial out
l View numbers
l End calls.
1. Incoming calls:
a. If an external user (for example x.2005) dials into the LQ-SIP line then the
LQ unit will auto-answer and establish the call. Audio will then pass between
all members of the Channel associated with the SIP line.
b. The CCM will show the incoming caller number.
c. The CCM user can hang up the call by selecting the phone icon and hanging
up.
Page 116
To Next Page
Loading...
Need help?
General
