User Guide| LQ Series 4.0
5 Front panel interface
From the front panel of the LQ you can:
l Set audio configuration
l input gain
l output gain
l Set VOX configuration
l VOX
l Threshold
l Delay
l Set 2-wire specific settings
l Powering of the line
l Clear-Com/RTS mode
l Auto-nulling
l Termination
l Set 4-wire specific settings
l Port Function: set port function of Ethernet cable ‘to Matrix’ or ‘to Panel’,
l Vox levels
l Baud rate
l See GPIO settings
l Test GPO hardware trigger
l Set Mic level/line level (mic level for use when connecting directly to a radio)
l Set device settings
Page 53
To Next Page
Loading...
