User Guide| LQ Series 4.0
3 Core Configuration Manager (CCM) walkthrough
This section gives you an overview of your configuration tool. Find context sensitive
help in the user interface by clicking on the blue ? icon.
3.1 How to Access the Core Configuration Manager (CCM)
1. Make sure the LQ device is connected to a network (either LAN connector on
back of device).
2. Open a browser (PC, tablet, mobile) on the same network as the LQdevice and
input the IP address of your LQ in the addressfield. Find the IP address in the
front menu screens of your device.
3.1.1 Minimum requirements for the CCM
Supported on the latest versions of all major web browsers (i.e. Google Chrome,
Safari, Firefox, Internet Explorer, Opera).
3.2 Overview
This page shows an overview of all the devices in your system. Devices in the upper
part of the page are the units in a Link-Group. As LQs are added to the group, they
appear in this screen. A HelixNet device can also be included in a Link-Group (LQ
4.0 and above).
On the lower part of the screen you can see the external systems that your LQ
device is connected to. These can be:
l IVC (matrix) connections
l SIP (telephony interface) connections
l Agent-IC (mobile client) connections.
If you have a HelixNet in your Link-Group, you will see the remote units that are
connected to the HelixNet Main Station in the lower half of the Overview screen.
Page 22
To Next Page
Loading...
Need help?
General
