Clear-Com LQ-2W2 - Types of GPI (Input) Trigger

User Guide| LQ Series 4.0
Example 4. Call Event trigger. Passing call signals using GPIO
Note: Call signals are automatically propagated to all members of a Channel when using
LQ so a GPI trigger is unecessary. However, a GPIO interface will not send a call
signal trigger unless a GPO Call Channel event is set on that port.
12.4
Types of GPI (input) trigger
4 LQ port types Available GPI (input) trigger
LQ 2-Wire 1. Call 2. VOX
LQ 4-Wire 1. Call 2. VOX
LQ 4-Wire + GPIO 1. VOX 2. GPI
IVC-32 1. Call 2. VOX 3. GPI
Page 89