User Guide| LQ Series 4.0
The CCM will start limiting demands on the unit (for example it will prevent a port
being added to a Channel, or the addition of an IVC-32 or multi-Channel port) in
order to maintain good audio quality and responsiveness.
3.2.4
To optimize resource usage
l Reduce the network quality in the local audio mixes. Higher network quality
takes more resource.
l Reduce the number of ports that are in different Channels. Several ports in the
same Channel do not take much resource. It is more demanding if the ports
are spread over several Channels.
l Using a LAN/WAN/Routed Network Optimization mode will reduce the
overall resource usage (set Link-Group Optimization mode in the Linking
page of the CCM).
3.3 Device
The Device page takes you to the configuration options local to your LQ device. On
the left you see configuration page buttons; General, Network, Linking and
Ports. Switch between devices in a Link-Group using the dropdown menu just
above the device icon.
Page 25
To Next Page
Loading...
Need help?
General
