User Guide| LQ Series 4.0
7. You will see the interface port appear inside the direct box.
8. Repeat steps 5 and 6 to add a second port to the direct box, connecting the
ports within it.
9. To unassign the port from the direct connection click ‘-‘within the direct box
icon.
7.6
Changing a Channel label
Clicking on a blue channel/4-wire direct header will allow you to change the name of
the Channel or Direct. Enter the new channel/direct name and press <ENTER> key
or click the blue check mark to apply changes.
Page 68
To Next Page
Loading...
Need help?
General
