EasyManua.ls Logo

Clear-Com LQ-2W2 - How to Remove a Device from a Link-Group

Clear-Com LQ-2W2
181 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Guide| LQ Series 4.0
6.6 How to remove a device from a Link-Group
6.6.1
Remove an on-line Link-Member from a group
1. Access the browser-based CCM for any device within the Link-Group.
2. In the Overview page, click on the device image of the unit that you want to
remove from the group.
3. Navigate to Linking for that device.
4. Click Change Role to Link-Master.
5. Apply Changes.
The device will be reconfigured as a Link-Master and removed from the group.
6.6.2
Remove an off-line Link-Member from a group
1. Access the Core Configuration Manager for any device within the Link-Group.
2. In the Overview page, the off-line unit will show a red ‘X’. Click on this device.
3. You will be asked if you want to remove this unreachable device. Click Delete.
The device will be removed from the Link-Group.
If this same device is powered on again, it will automatically seek the same Link-
Master and ID slot. If the ID has been taken by another device, it will take the next
available ID. If no ID is available (because there are already 6 devices in the group)
it will not be able to join the group.
To re-use this device with a new Link-Master, it must be returned to the default role
(Link-Master) and then re-linked.
Page 63

Table of Contents

Other manuals for Clear-Com LQ-2W2

Related product manuals