User Guide| LQ Series 4.0
3. Create user account #2.
Your Agent-IC user profiles are now setup and the client device can chose a Profile
and connect to the system.
15.5.1 Connect Agent-IC to LQ
1. From your phone or tablet, select an Agent-IC user profile from the 4 available.
In this case you need to select an LQ profile, as LQ is the host device.
2. Click the Settings button.
3. Enter login credentials (User ID and Password).
4. Enter the LQ IP address.
5. Press the round Start button to connect.
Open the LQ Core Configuration Manager (CCM).
For more information, see:
How to Access the Core Configuration Manager (CCM) on page 22
Page 136
To Next Page
Loading...
Need help?
General
