User Guide| LQ Series 4.0
Note: The Link Group Role status of the HMS is set to Disabled by default. This stops the
device from broadcasting its DNS to the network. The device is not visible to other
devices on the network while Link Group Role is disabled.
19.3.5 How do I add an LQ port to a HelixNet Channel?
LQ ports are available to a HelixNet Main Station (HMS) when the devices are
linked in a Link-Group configuration.
1. Open the Core Configuration Manager (CCM) of any device in the HMS/LQ Link-
Group.
2. Navigate to the Assignments page.
Page 156
To Next Page
Loading...
