Meter Setup
62
Auto off
You can set up your meter so that it powers itself off automatically if it has not been used (no
buttons touched or tests run) for a preselected time period. Use this feature to save power and
extend the time of usage before having to recharge the battery pack.
1 From the Main Menu, touch Setup to
open the meter settings.
2 From the Setup menu, touch Basics.
3 In the Setup-Basics menu, touch Auto
Off.
If connected to the power adapter or the Handheld Base Unit, the meter goes into standby
mode instead of powering off if it has not been used for 10 minutes. Furthermore the meter
can perform a maintenance reboot on a regular basis. The latter will only occur during meter
inactivity.
Main Menu
Control Test
Review Results
Setup
Patient Test
09:15 am
04/19/2016
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
04/19/2016
Language
Date/Time
Sound
Contrast
Auto Off
Setup - Basics
04/19/2016
To Next Page
Loading...