cobas h 232 User Manual

Meter Setup
102
Quality control (QC) lockout
A QC Lockout requires a quality control test to be performed. You may also set the number of
levels for this test. You may select from the following options:
■ New Lot: Yes/No (applies every time a new test strip lot is used)
The general intervals are:
■ No
■ Daily
■ Weekly
■ Monthly
All enabled QC Lockouts, if the time period has elapsed, are activated at 8:00 a.m. (default set-
ting, time can be changed with a DMS).

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)