cobas h 232 User Manual

Meter Setup
104
Instrument quality control (IQC) lockout
An IQC Lockout also requires a quality control test with dedicated IQC test strips to be per-
formed. You may select from the following options:
■ No
■ Daily
■ Weekly
■ Monthly
All enabled IQC Lockouts, if the time period has elapsed, are activated at 8:00 a.m. (default set-
ting, time can be changed with a DMS).
See page 101 on how to access the Setup-QC Settings menu.
1 Touch IQC Lockout to set regularly recur-
ring instrument quality control tests (IQC
= Instrument Quality Control).
2 Touch the button to select the time interval
of choice. Your selection is now high-
lighted.
3 Touch to save this setting, or touch
to exit this menu without saving any
changes. The display automatically returns
to the previous screen.
QC Lockout
IQC Lockout
QC Result Format
Custom Range Trop. T
Reset Test Param.
Setup - QC Settings
04/19/2016
No
Daily
Weekly
Monthly
Select IQC Lockout
04/19/2016

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)