Maintenance and Care
175
Cleaning the meter
Only use the cleaning agents recommended on page 173. Procede as follows for cleaning the
meter.
1 If required, remove the meter from the
Handheld Base Unit and place it horizon-
tally on a table.
2 Remove the test strip guide cover by pull-
ing it forward horizontally (in the direction
of the arrow).
Move the cover safely away from the
meter and wipe it clean using the
solutions recommended above.
In case of significant soiling or contami-
nation, you can rinse the test strip guide
cover with warm water.
Dry it with a fresh tissue.
3 Clean the outside of the meter with a
lightly moistened tissue. Then dry the
meter with a fresh tissue.
To Next Page
Loading...