cobas h 232 User Manual

Meter Setup
109
Cleaning lockout
Under normal handling conditions, your meter will not be exposed to significant dirt or contami-
nation. However, circumstances might require regular checks of the test strip guide and (when
necessary) cleaning of the meter. The Cleaning Lockout allows operators to specify time intervals
for cleaning.
1 From the Main Menu, touch Setup to open
the meter settings.
2 From the Setup menu, touch Lockout.
3 From the Setup-Lockout menu, touch
Cleaning Lockout.
You may select from the following options:
■ No
■ Daily
■ Weekly
■ Monthly
4 Touch the button to select the time interval
of choice. Your selection is now high-
lighted.
5 Touch to save this setting, or touch
to exit this menu without saving any
changes. The display automatically returns
to the previous screen.
Main Menu
Control Test
Review Results
Setup
Patient Test
09:15 am
04/19/2016
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
04/19/2016
QC Settings
Cleaning Lockout
STAT Test Confi g.
Operator Lockout
Setup - Lockout
04/19/2016
Daily
Weekly
Monthly
No
Select Cleaning Lockout
04/19/2016

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)