cobas h 232 User Manual

Extended Functionalities
165
Operator lists
After powering the meter on, an Operator login may be configured. If no list is available, the
options described on page 89 apply.
■ Operator is set to Optional or Required:
The Operator can either log in via the onscreen keypad or a barcode scan. The use of the
meter is not restricted to a predefined Operator group, so Operator IDs are entered via the
onscreen keypad or read from the barcode and stored with test results for informational
purposes only.
■ Operator is is set to Scan Only:
The display of the meter's onscreen keypad is blocked. The Operator can only log in via
a barcode scan as there is no onscreen keypad. The use of the meter is not restricted to
a predefined Operator group, so Operator IDs are read from the barcode and stored with
test results for informational purposes only.
Meters which are managed by a DMS may receive an Operator list.
■ Operator ID is set to List, a list is available and displayed on the login screen:
The Operator selects the ID from the displayed list. If so configured by the Administrator,
the Operator may also be required to enter a password to log in.
■ Operator ID is set to Hidden List:
The Operator can login via a barcode scan or the onscreen keypad. If so configured by
the Administrator, the Operator may also be required to enter a password to log in.
When working with operator lists: The use of the meter is restricted to the operators on this
list.

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)