Meter Setup
100
Quality control (QC) settings
QC Settings define that operator-independent quality control tests must be run on a regular
basis. Lockouts may be triggerd by selectable time periods, and lockouts may be triggered by
certain events. The QC Settings menu contains the following options:
■ QC Lockout (time-based), with the additional option of a New Lot Lockout (applies every
time a new test strip lot is used)
■ IQC Lockout (time-based)
■ Custom Range Trop. T (customize the QC Range in accordance with applicable local
guidelines)
■ QC Result Format (select the format for QC result displays)
■ Reset Test Param. (reset all test parameters, including code chip data and QC lockouts)
To Next Page
Loading...