cobas h 232 User Manual

201
C Supplement for Observed Test Sequence
Observed Test Sequence (OTS)
The Observed Test Sequence (OTS) function allows an observer (supervisor) to assess and record
an operator’s performance (e.g., for recertification purposes). The observer monitors an operator
during a test to check that the test is being performed according to the recommended proce-
dures. He/she then evaluates the performance and passes or fails the operator. This assessment
is saved together with the test result and any desired comments.
Observed Test Sequence options can only be configured using a DMS. The availability of
electronic configuration options will thus vary according to the data management software
utilized by your institution. Consult your system administrator.

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)