cobas h 232 User Manual

Putting the Meter into Operation
41
Powering the meter on and off
1 Power the meter on by pressing the
button.
You can also power on the meter directly by
connecting the power adapter or by placing
the meter on the Handheld Base Unit.
2 To power the meter off after use, press the
button for approximately 1 second.

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)