cobas h 232 User Manual

Meter Setup
69
Printer
The meter can connect directly with three different infrared printers. The Handheld Base Unit
cannot be used for this purpose.
The option to print is displayed in a test result as well as directly after a test and when calling up
stored results. Using the settings you enter here, you can activate or deactivate the meter‘s ability to
print.
Connection to a printer can only be established via infrared.
Enabling the connection to a printer disables the connection to a computer (and vice versa).
15 From the Select Connection menu, touch
Printer. Your selection is now high-
lighted.
16 Touch to confirm the selection. The
next screen allows you to choose the type
of printer you are using.
17 Touch to save this setting, or touch
to exit this menu without saving any
changes. The display automatically
returns to the Setup-Data Handling menu.
Select Connection
Printer
Computer
Off
QR Code
04/19/2016
Citizen CMP-10
GeBE GPT-437x
Zebra MZ320
Select Printer
04/19/2016

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)