cobas h 232 User Manual

Meter Setup
43
3 Meter Setup
Buttons are screen prompts that cause something to happen when touched. In this manual the
names of all buttons are either shown as bold text or as the icon used on the button (e.g., for
OK ).
When text refers to other screen elements (e.g., Menu titles), these are written in italics. These
screen elements are not active.
You can open any displayed function by
touching (or tapping) the button for it with
your finger (or a special pen for this purpose).
“Tap” means: Touch the button, then remove
your finger from the touchscreen. The next
screen appears once you remove your finger.
1 Touch Setup to call up the Setup menu.
2 Select the group of settings of choice
(see the Settings summary following this
section).
For a description of the buttons and icons
used on screen see page 31.
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
04/19/2016
Main Menu
Control Test
Review Results
Setup
Patient Test
09:15 am
04/19/2016

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)